The individual who can perform computer repair is able to open the casing case, determine what components are not functioning correctly, and fix or replace them. You can learn to repair one part at a time. Hands on experience is the only way to become really proficient at diagnosing and fixing the malfunction.
The motherboard is a circuit board and every other component connects to it. They all look similar, however, there may be small differences from one name brand to another. If it is the motherboard that is not working correctly, that is the component that needs to be fixed or replaced.
Open the back of the case by taking out the screws and removing the panel. You will see the motherboard. Use a Philips screwdriver to take out the screws holding it in place. Remove it and examine it to see what is wrong. You can either fix it, with or without help, or purchase and install a new one.
The CPU may be in a specified position. It must be aligned with slots when you reinstall it. As you replace the other components, do not confuse the CPU fan slot with the chassis fan slot. They may look alike but there are small variations in size.
Attach the RAM and jumper wires into the correct slots. These wires control the light on the front panel of the casing. There will be variations in instructions from one computer to another. You should receive a manual for each component. Then you can begin fixing the IDE cables to enable use of the hard drive, CDROM and floppy disc drive.
When reassembling, put all drives in place and connect the IDE cables. The power supply cables connect to the drives. The three cables join together in what is commonly called the Y cable. After everything is attached to the motherboard and it is in place, put the back panel on and see if what you repaired or replaced took care of the problem. If so, you are well on the way to becoming competent in computer repair.
The motherboard is a circuit board and every other component connects to it. They all look similar, however, there may be small differences from one name brand to another. If it is the motherboard that is not working correctly, that is the component that needs to be fixed or replaced.
Open the back of the case by taking out the screws and removing the panel. You will see the motherboard. Use a Philips screwdriver to take out the screws holding it in place. Remove it and examine it to see what is wrong. You can either fix it, with or without help, or purchase and install a new one.
The CPU may be in a specified position. It must be aligned with slots when you reinstall it. As you replace the other components, do not confuse the CPU fan slot with the chassis fan slot. They may look alike but there are small variations in size.
Attach the RAM and jumper wires into the correct slots. These wires control the light on the front panel of the casing. There will be variations in instructions from one computer to another. You should receive a manual for each component. Then you can begin fixing the IDE cables to enable use of the hard drive, CDROM and floppy disc drive.
When reassembling, put all drives in place and connect the IDE cables. The power supply cables connect to the drives. The three cables join together in what is commonly called the Y cable. After everything is attached to the motherboard and it is in place, put the back panel on and see if what you repaired or replaced took care of the problem. If so, you are well on the way to becoming competent in computer repair.
About the Author:
You should learn computer repair one component at a time. If you want some information on this topic, we can surely give it to you because this and laptop repair is our specialist area.
No comments:
Post a Comment